Industrial Switch MES3510P

MES3510P
Key features
  • Up to 24 Gbps bandwidth
  • Non-blocking architecture
  • L3 switches
  • Passive cooling
  • Support for Multicast (IGMP Snooping, MVR)
  • Advanced security functions (L2-L4 ACL, IP Source Guard, Dynamic ARP Inspection, etc.)

Get price.Free equipment test
Description
Specifications
Documents and files
Warranty
Physical parameters

Description

MES3510P industrial switches manufactured by Eltex are designed to organize secure fault-tolerant networks on sites with high requirements to temperature, vibrations and mechanical impact.

The switches have 10/100/1000BASE-T with PoE/PoE+ technology support and Combo ports of 10/100/1000BASE-T/ 1000BASE-X/100BASE-FX for optional connection of optic-fiber cable.

Specifications

Interfaces
  • 8х10/100/1000BASE-T PoE/PoE+
  • 4x100BASE-FX/1000BASE-X (SFP)
  • Console port RS-232 (RJ-45)

Performance
  • Bandwidth - 24 Gbps
  • Throughput for 64 bytes* - 17.8 MPPS
  • Buffer memory - 1.5 MB
  • RAM (DDR3) - 512 MB
  • ROM (RAW NAND) - 512 MB
  • MAC table - 16384
  • VLAN table - 4094
  • L2 Multicast groups - 4091
  • ARP table** - 4023
  • SQinQ rules 3006 (ingress/egress)
  • ACL rules - 3006
  • L3 IPv4 Unicast routes*** - 12866
  • L3 IPv6 Unicast routes*** - 3222
  • L3 IPv4 Multicast routes (IGMP Proxy, PIM)*** - 3876
  • L3 IPv6 Multicast routes (IGMP Proxy, PIM)*** - 1006

Technical features
  • VRRP routers - 255
  • Maximum size of ECMP groups - 8
  • VRF - 16 (including default VRF)
  • L3 interfaces - 2048
  • Link Aggregation Groups (LAG) - 48, up to 8 ports per LAG
  • Quality of Service (QoS) - 8 egress queues per port
  • Jumbo frames - 10240 bytes

Interfaces functions
  • HOL blocking protection
  • Back Pressure
  • Auto MDI/MDIX
  • Jumbo frames
  • IEEE 802.3X flow control
  • Port mirroring (SPAN, RSPAN)

MAC table functions
  • Independent mode of learning for each VLAN
  • MAC Multicast Support
  • Automatic MAC addresses aging
  • Static MAC Entries
  • MAC Flapping logging

VLAN functions
  • Voice VLAN
  • IEEE 802.1Q
  • Q-in-Q
  • Selective Q-in-Q
  • GVRP

L2 Multicast functions
  • Multicast profiles
  • Multicast static groups
  • IGMP Snooping v1,2,3
  • Port/host based IGMP Snooping Fast Leave
  • Pim-Snooping
  • IGMP proxy-report
  • Support for IGMP autorization via RADIUS
  • MLD Snooping v1,2
  • IGMP Querier
  • MVR

L2 functions
  • STP (Spanning Tree Protocol, IEEE 802.1d)
  • RSTP (Rapid Spanning Tree Protocol, IEEE 802.1w)
  • MSTP (Multiple Spanning Tree Protocol, IEEE802.1s)
  • STP Multiprocess
  • PVSTP+
  • RPVSTP+
  • Spanning Tree Fast Link option
  • STP Root Guard
  • STP Loop Guard
  • BPDU Filtering
  • STP BPDU Guard
  • Loopback Detection (LBD) based on VLAN
  • ERPS (G.8032v2)
  • Flex-link
  • Private VLAN, Private VLAN Trunk
  • Layer 2 Protocol Tunneling (L2PT)

L3 functions
  • Static IP routes
  • Dynamic routing protocols: RIPv2, OSPFv2, OSPFv3, BGP****(IPv4 Unicast, IPv4 Multicast, IPv6 Unicast)
  • BFD (for BGP)
  • Address Resolution Protocol (ARP)
  • Proxy ARP
  • Policy-Based Routing (IPv4)
  • VRRP
  • Multicast routing protocols: PIM SM, PIM DM, IGMP Proxy, MSDP
  • ECMP load balancing
  • IP Unnumbered
  • GRE
  • VRF

Link Aggregation functions
  • Static LAG
  • Dynamic LAG (LACP)
  • LAG Balancing Algorithms
  • Multi-Switch Link Aggregation Group (MLAG)

IPv6 functions
  • IPv6 Host
  • Dual-stack

Service functions
  • Virtual Cable Testing (VCT)
  • Optical transceiver diagnostic
  • Green Ethernet

Security functions
  • DHCP Snooping
  • DHCP option 82
  • IP Source Guard
  • Dynamic ARP Inspection
  • First Hop Security
  • sFlow
  • MAC-based authentication, Port Security, static MAC entries
  • Port-based authentication IEEE 802.1x
  • Guest VLAN
  • DoS attack prevention
  • Traffic segmentation
  • Protection against non-authorized DHCP servers
  • DHCP client filtering
  • BPDU attack prevention
  • NetBIOS/NetBEUI filtering
  • PPPoE Intermediate Agent

ACL
  • L2-L3-L4 ACL (Access Control List)
  • Time-Based ACL
  • IPv6 ACL
ACL based on:
  • Physical port number
  • IEEE 802.1p
  • VLAN ID
  • Ethertype
  • DSCP
  • Protocol type
  • TCP/UDP port number
  • User Defined Bytes

Quality of service (QoS) and rate limiting
  • QoS statistics
  • Port rate limiting (shaping, policing)
  • IEEE 802.1p CoS
  • Storm Control
  • Bandwidth management
  • Scheduling algorithms: Strict Priority/Weighted Round Robin (WRR)
  • Three marking colors
  • ACL-based CoS/DSCP mark assignment
  • ACL-based VLAN mark assignment
  • 802.1p priorities adjustment for Management VLAN
  • CoS to DSCP, DSCP to CoS remarking
  • 802.1p DSCP mark assignment for IGMP

ОАМ/CFM
  • IEEE 802.3ah Ethernet Link OAM
  • Dying Gasp
  • IEEE 802.1ag Connectivity Fault Management (CFM)
  • IEEE 802.3ah Unidirectional Link Detection

Management functions
  • Configuration file download and upload via TFTP
  • SNMP (Simple Network Management Protocol)
  • Command line interface (CLI)
  • Redirection of CLI output to a file in ROM
  • Web interface
  • Syslog
  • SNTP (Simple Network Time Protocol)
  • Traceroute
  • LLDP (802.1ab) including LLDP MED support
  • Configuration of user privilege level
  • Management interface blocking
  • Local authentication
  • IP addresses filtering for SNMP
  • RADIUS and TACACS+ (Terminal Access Controller Access Control System) clients
  • SSH server
  • SSL
  • Macrocommands
  • CLI commands logging
  • DHCP autoprovision
  • DHCP Relay (Option 82)
  • DHCP Option 12
  • DHCPv6 Relay, DHCPv6 LDRA (Option 18, 37)
  • PPPoE Circuit ID tag
  • Flash File System
  • Debugging commands
  • Rate limit of traffic to CPU
  • Password encryption
  • Password recovery
  • Ping (IPv4/IPv6)
  • FTP server2
  • DNS server (Resolver)

Monitoring functions
  • Interface statistics
  • RMON/SMON remote monitoring
  • IP SLA
  • CPU utilization monitoring per task and traffic type
  • RAM monitoring
  • Temperature monitoring
  • TCAM utilization monitoring

MIB/IETF
  • RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
  • RFC 1212 Concise MIB Definitions
  • RFC 1213 MIB II
  • RFC 1215 MIB Traps Convention
  • RFC 1493, 4188 Bridge MIB
  • RFC 1157, 2571-2576 SNMP MIB
  • RFC 1901-1908, 3418, 3636, 1442, 2578 SNMPv2 MIB
  • RFC 271,1757, 2819 RMON MIB
  • RFC 2465 IPv6 MIB
  • RFC 2466 ICMPv6 MIB
  • RFC 2737 Entity MIB
  • RFC 4293 IPv6 SNMP Mgmt Interface MIB
  • Private MIB
  • RFC 3289 DIFFSERV MIB
  • RFC 2021 RMONv2 MIB
  • RFC 1398, 1643, 1650, 2358, 2665, 3635 Ether-like MIB
  • RFC 2668 802.3 MAU MIB
  • RFC 2674, 4363 802.1p MIB
  • RFC 2233, 2863 IF MIB
  • RFC 2618 RADIUS Authentication Client MIB
  • RFC 4022 MIB for TCP
  • RFC 4113 MIB for UDP
  • RFC 3298 MIB for Diffserv
  • RFC 2620 RADIUS Accounting Client MIB
  • RFC 2925 Ping & Traceroute MIB
  • RFC 768 UDP
  • RFC 791 IP
  • RFC 792 ICMPv4
  • RFC 2463, 4443 ICMPv6
  • RFC 4884 Extended ICMP for Multi-Part messages support
  • RFC 793 TCP
  • RFC 2474, 3260 Definition of the DS field in the IPv4 and IPv6 headers
  • RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
  • RFC 2571, RFC2572, RFC2573, RFC2574 SNMP
  • RFC 826 ARP
  • RFC 854 Telnet
  • IEC 61850
______________________________________________
*Values are given for 1-way transmission
**For each host in the ARP table, an entry is created in the routing table
***IPv4/IPv6 Unicast/Muliticast share hardware resources

****BGP protocol support is provided under license

Documents and files

Warranty

Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.

During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.

As part of the warranty service, technical support is provided on the first-in first-out principle.

The priority support packages of 8/5 and 27/7 types are subjects to additional charges.

Physical parameters

Power supply
  • with PoE enabled: 45–57 V DC
  • with PoE disabled: 20–57 V DC
Input current
  • with PoE enabled: 5.78–4.56 A
  • with PoE disabled: 1.0–0.35 A
Maximum power consumption (including PoE)
  • 260 W
PoE budget
  • 240 W (for 802.3at applications, 54–56 V DC is recommended)
Heat dissipation
  • 20 W
Hardware support for Dying Gasp
  • yes
Signal relay
  • one signal relay output: 1 A 24 V DC
Operating temperature
  • -40 to +70 °С
Storage temperature
  • from -50 to +85 °С
Humidity
  • from 5 to 95 % (non-condensing)
Cooling
  • passive
Case
  • metal
  • IP30
Form factor
  • DIN rail for wall mounting (optional in supply package)
Dimensions (WxHxD), mm
  • 85x175x115
Weight
  • 1.74kg