Solution for enterprise WEP-2L provides accessible, easy-to-use, high-performance and secure wireless network that combines numerous features and services required by corporate clients. WEP-2L is a universal solution for organization of wireless networks in highly crowded areas and high traffic environments (Offices, state institutions, conference halls, laboratories, hotels, etc.).
Scalability The WEP-2L wireless access point is an up-to-date flexible solution that allows you to change the network coverage in order to increase the quantity of serviced mobile devices. Due to high performance hardware platform, scalability features and easy-to-use interface , it is possible to set up IT infrastructure simply and fast.
Wireless connection Due to support for IEEE 802.11n/ac standards the WEP-2L access point provides 300 Mbps (at 2.4 GHz) and 867 Mbps (at 5 GHz) data rates. The use of MIMO technology and embedded omnidirectional antennas makes WEP-2L a universal solution for corporate networks construction.
SecurityWEP-2L provides personal data protection and corporate environment security due to the support for modern authentication technologies. Particularly, it uses a dynamic key that is unique for each active user station.
Performance High-performance processors are used in the devices in order to provide reliability and high data processing rates.
Power supply The PoE+ technology makes the installation possible practically at any place regardless of the power supply location, thus allowing for cost economy on power cables and making the installation easier and faster.
Specifications
Interfaces
1 port of 10/100/1000Base-T (RJ-45)
WLAN capabilities
Support for IEEE 802.11a/b/g/n/ac
Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
WMM-based packet priorities and planning
Dynamic frequency selection (DFS)
Support for hidden SSID
8 virtual access points
External access points detection
Spectrum analyzer
Network features
Automatic speed negotiation, duplex mode negotiation and MDI-MDI-X switch-over
VLAN support (Access, Trunk, General)
802.1X authentication support
DHCP client
GRE support
ACL support
NTP support
Syslog support
QoS functions
Packet priorities and planning based on profiles
Bandwidth limiting for each SSID
Security
Centralized autorization via RADIUS server (WPA/WPA2 Enterprise)
1 The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country
2 The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the network, environment , the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.