Wireless access point WOP-2L

WOP-2L
Key features
  • Dual band access point with support for 802.11ac
  • Radio interface with MIMO 2x2 support
  • PoE+ power supply (IEEE 802.3at)
  • Up to 40 clients per an access point
  • Up-to-date authentication and encryption means

Get price.Free equipment test
Description
Specifications
Physical parameters
Documents and files
Warranty

Description

All-weather access point
WOP-2L provides high-performance and safe wireless connection that combines numerous features and services which are necessary for convenient network access in crowded areas. WOP-2L is a proper solution for organization of wireless networks in various climatic conditions: in a wide range of operating temperatures and high humidity (in parks, at factories, stadiums, etc.). The device provides an optimal platform for communication networks organization in suburban settlements and remote locations.

Scalability
The WOP-2L wireless access point is an up-to-date flexible solution that allows you to change the network coverage in order to increase the quantity of serviced mobile devices. Due to high performance hardware platform, scalability features and easy-to-use interface , it is possible to set up IT infrastructure simply and fast.

Wireless connection
Due to support for IEEE 802.11n/ac standards the WOP-2L access point provides 300 Mbps (at 2.4 GHz) and 867 Mbps (at 5 GHz) data rates.
The use of MIMO technology and embedded omnidirectional antennas makes WOP-2L a universal solution for corporate networks construction.

Security
WOP-2L provides personal data protection and corporate environment security due to the support for modern authentication technologies. Particularly, it uses a dynamic key that is unique for each active user station.

Performance
High-performance processors are used in the devices in order to provide reliability and high data processing rates.

Power supply
The PoE+ technology makes the installation possible practically at any place regardless of the power supply location, thus allowing for cost economy on power cables and making the installation easier and faster.

Specifications

Interfaces
  • 1 port of 10/100/1000Base-T (RJ-45)
  • 2 SMA-type connectors (female) for external antenna connection (Omni, sectoral, panel, etc.)

WLAN capabilities
  • Support for IEEE 802.11a/b/g/n/ac
  • Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
  • WMM-based packet priorities and planning
  • Dynamic frequency selection (DFS)
  • Support for hidden SSID
  • 8 virtual access points
  • External access points detection
  • Spectrum analyzer

Network features
  • Automatic speed negotiation, duplex mode negotiation and MDI-MDI-X switch-over
  • VLAN support (Access, Trunk, General)
  • 802.1X authentication support
  • DHCP client
  • GRE support
  • ACL support
  • NTP support
  • Syslog support

QoS functions
  • Packet priorities and planning based on profiles
  • Bandwidth limiting for each SSID

Security
  • Centralized autorization via RADIUS server (WPA/WPA2 Enterprise)
  • WPA/WPA2 encryption
  • Support for Captive Portal

Configuration
  • Remote management via Telnet, SSH
  • CLI
  • NETCONF
  • WEB interface

Wireless interface specifications
  • Frequency range 2402–2482 MHz, 5170–5835 MHZ
  • DSSS, CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
  • Support for MIMO 2х2
  • Bandwidth:
  • 20, 40 MHz for 2.4 GHz;
  • 20, 40 and 80 MHz for 5 GHz.
Operating channels1
  • 802.11b/g/n: 1–13 (2402–2482 MHz)
  • 802.11a/n/ac:
  • 36–64 (5170–5320 MHz)
  • 100–144 (5490–5720 MHz)
  • 149–165 (5745–5835 MHz)
Data rate2
  • 802.11a: up to 54 Mbps
  • 802.11b: up to 11 Mbps
  • 802.11g: up to 54 Mbps
  • 802.11n: up to 300 Mbps
  • 802.11ac: up to 867 Mbps
Receiver sensitivity
  • 2.4 GHz: up to -98 dBm
  • 5 GHz: up to -96 dBm
Maximum power of the transmitter1
  • 2.4 GHz: 20 dBm
  • 5 GHz: 20 dBm




1 The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.


2 The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the network, environment , the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.

Physical parameters

Maximum power consumption
  • 8 W
Flash
  • 32 MB
RAM
  • 128 MB
Power supply
  • PoE+ 48V/54V (IEEE 802.3at-2009)
Operating temperature
  •  from -45 °C to +65 °C
Protection level
  • P54
Dimensions (WxHxD)
  • 88x232.5x47 мм

Fastening method

  • Pole mount

Documents and files

Warranty

Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.

During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.

As part of the warranty service, technical support is provided on the first-in first-out principle.

The priority support packages of 8/5 and 27/7 types are subjects to additional charges.