Wireless access point WEP-2AC

WEP-2AC
Key benefits
  • Dual band access point with support for 802.11ac (5G Wi-Fi)
  • Power supply: PoE+ (IEEE 802.3at)
  • Operation in a cluster without a dedicated server (up to 64 devices)
  • Seamless roaming
  • Up-to-date authentication and encryption means

Get price.Free equipment test
Description
Specifications
Physical parameters
Documents and files
Warranty

Description

Solution for enterprise
WEP-2ac provides accessible, easy-to-use, high-performance and secure wireless network that combines numerous fea-tures and services required by corporate clients.
WEP-2ac is a universal solution for organization of wireless networks in highly crowded areas and high traffic environ-ments (offices, state institutions, conference halls, laborato-ries, hotels, etc.).

Wireless connection
Due to support for IEEE 802.11n/ac standards, the WEP-2ac access point provides 867 Mbps (at 5 GHz) and 300 Mbps (at 2.4 Ghz) data rates.
The use of MIMO technology and embedded omni-directional antennas makes WEP-2ac a universal solution for corporate networks constriction.

Security
WEP-2ac provides personal data protection and corporate en-vironment security due to the support for modern authenti-cation technologies. Particularly, it uses a dynamic key that is unique for each active client.

Performance
High-performance processors are used in the devices in order to provide reliability and high data processing rates.

Power supply
The PoE+ technology makes installation of the equipment pos-sible virtually everywhere, regardless of the power supply lo-cation. The use of PoE+ technology reduces total cost by dis-carding power cables and makes installation easier and faster.

Specifications

Interfaces
  • 1 Ethernet port 10/100/1000Base-T (RJ-45)
  • Console (RJ-45)

WLAN capabilities
  • Support for IEEE 802.11a/b/g/n/ac
  • Data aggregation, including A-MPDU (Tx / Rx) и А-MSDU (Rx)
  • WMM-based packet priorities and planning
  • Dynamic frequency selection (DFS)
  • Support for hidden SSID
  • 32 virtual access points
  • External access points detection
  • APSD
  • WDS

Network features
  • Automatic speed negotiation, duplex mode negotiation and MDI/MDI-X switch-over
  • VLAN support
  • 802.1X authentication support
  • DHCP client
  • LLDP support
  • ACL support
  • IPv6 support

Cluster mode operation
  • Cluster creation with the capacity of up to 64 access points
  • Load balancing among access points
  • Automatic synchronization of access points configurations in a cluster
  • Single Management IP – a unified address for access points management in a cluster
  • Automatic frequency channel allocation for multiple access points
  • Authentication via RADIUS server

QoS functions
  • Packet priorities and planning based on profiles
  • Bandwidth limiting for each SSID
  • Modification of WMM parameters for each radio interface

Security
  • Centralized authorization via RADIUS server (WPA Enterprise)
  • WPA/WPA2 encryption
  • Support for Captive Portal
  • E-mail notifications on system events

Wireless interface specifications
  • Frequency range 2400–2480 MHz, 5150–5850 MHZ
  • CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
  • Embedded omnidirectional antennas
  • Support for 2х2 MIMO
Active channels1
  • 802.11b/g/n: 1-13 (2412 - 2472 MHz)
  • 802.11a/n/ac:
  • 36-64 (5180 - 5320 MHz)
  • 100-144 (5500 - 5720 MHZ)
  • 149-165 (5745 - 5825 MHZ)
Data transfer rate2
  • 802.11n: 300 Mbps
  • 802.11ac: 867 Mbps
Receiver sensitivity
  • 2.4 GHz: up to -98 dBm
  • 5 GHz: up to -94 dBm
Maximum power of the transmitter
  • 2.4 GHz: up to 18 dBm1
  • 5 GHz: up to 21 dBm1

Configuration
  • Software update and configuration via DHCP Autoprovisioning
  • Remote management via Telnet, SSH
  • Web interface
  • SNMP



1The number of channels and the value of the maximum output power will vary according to the rules of radio frequency regulation in your country.
2 The maximum wireless data rate is defined according to IEEE 802.11n/ac standard. The real bandwidth can be different. Conditions of the network, environment, the amount of traffic, building materials and constructions and network service data can decrease the real bandwidth. The environment can influence on the network coverage range.

Physical parameters

Power consumption
  • no more than 13 W
NAND Flash
  • 128 MB
RAM DDR3
  • 256 MB
Power supply
  • PoE+ 48V/54V (IEEE 802.3at-2009)
Operating temperature
  • from +5 °C to +40 °C

Documents and files

Warranty

Regardless of the operational lifetime stage, Eltex provides a 12 months warranty on all its telecommunication equipment.

During the warranty period the manufacturer ensures technical support and free-of-charge repair at the Enterprise which is situated in Novosibirsk.

As part of the warranty service, technical support is provided on the first-in first-out principle.

The priority support packages of 8/5 and 27/7 types are subjects to additional charges.